10 Things To Check Daily on your Coil Tubing Injector to Avoid Costly Repairs & Downtime

10 Things to Check Daily on your Coil Tubing Injector to Avoid Costly Repairs & Downtime

• Pan & Surrounding Area
  • Inspect pan for foreign debris including but not limited to: r-clips, steel shavings, cotter pins & gripper block bolts
• Oil Levels
  • Check gearbox lubricant levels, should be ¾ of the way up site glass

• Lubrication
  • Check to ensure lubrication system is operational
• Gripper Blocks
  • Inspect and clean gripper blocks

• Drive Chain
  • Look for damaged or missing r-clip
  • Inspect master links, which are the marker links; they should be vertical and in the same orientation on both pins
• Hoses
  • Check all hoses & fittings for leaks, damage or wear

• Filter Indicators (Not in Bypass)
  • Check filter indicators
  • Check frame and base for damage
• Grease
  • Grease idler sprocket bearings

• Chain Tension Cylinders
  • Ensure they are functioning proper with even pressure on all side
  • Check for missing bolts or pins
  • Grease around idler bearing
  • Inspect that bearings appear to be intact
  • Inspect that spacers are still in tact
• Arch Alignment
  • Visual inspection of arch alignment
  • No marks on TBG
  • TBG touches rollers

Coil Solutions hopes you enjoy these blog posts and they are beneficial to your organization.

Have an idea for a future post?  Or a comment on a previous post?  We welcome all feedback and look forward to hearing from you.

Don’t forget to follow Coil Solutions:

Twitter: @CoilSolutions

LinkedIn: www.linkedin.com/company/coil-solutions-inc