Well Intervention & Stimulation

Extend the life of producing wells and restore or enhance production

Our leading-edge tools help you to  improve the performance of your wells or access stranded or additional reserves.  Our patented sonic pulse technology and combination tool systems can restore and significantly enhance production.  Talk to us about the exceptional results we are delivering for our clients around the world.

Bi-Directional Jar

Gives a positive upward and downward impact to the BHA below, freeing immobilized tools.View Product

Bow Spring Centralizer

Designed to centralize the BHA inside tubing or casing after it has passed through a restricted ID. Allows passage of activation devices.View Product

CSI Automatic Flow Diverter Tool

New and patented tool allows maximum flow to remove debris from the well in less time.View Product

CSI Max Force Jar

Shorter than most jars on the market without compromising function. Can be modified to impact only upwards or downwards if required.View Product

CSI Selective Perforating Tool

Increases efficiency during abrasive perforating, especially multi-stage fracturing operations. Flow can be selectively diverted from the straight-through path of the BHA to the abrasive jetting housing and back to the straight-through path again. View Product

Deployment Bar

This is used when a bottom hole assembly needs to be held on surface for snubbing applications.View Product

Double Ball Drop

Built for high torque, short bottom hole assembly applications. Easy and short redress time.View Product

Extended Reach Tool

Increases the operational depth range of coiled tubing strings.View Product

Fluted Centralizers

Our fluted centralizers give the bottom hole assembly stand off from the casing wall to prevent wear from the tool drag.View Product

Frac Tools

We offer a variety of frac tool rentals that can be used in different configurations for a variety of different size casings, up to a depth of 1500 meters.View Product

Hammerhead Disconnect

Enables the operator to drop a ball and pressure up to disengage the tool from the remaining stuck tool string while controlling flow back to surface through coil.View Product

Helix Multi Stimulation Technology

Manipulates fluids, gases or mixtures to produce dynamic turbulent flow while conducting cleanout operations to remove debris. Enhances the effect of water and chemicals.View Product

Hydraulic Disconnect

Separates itself from the remainder of a stuck tool string when jarring and pulling is insufficient to release immobilized tools.View Product

Internal Dimple Connector

Attaches the BHA to the end of the coil.View Product

Kelly Cock Valve

This tool was developed to safely deploy and retrieve coil tubing and jointed pipe bottom hole assemblies.View Product

Knuckle Joint Assembly

Provides additional flexibility to the tool string and allows tools to be run in restricted or highly deviated wells.View Product

Miscellaneous Downhole Tools

From completion nipples to clamps, we have all the downhole tools you require in a variety of sizes for your operations.View Product

Motorhead Assembly

Compact tool which incorporates Twin Flapper Check Valve Assembly, Hydraulic Disconnect, and a Tri-Circulating Sub as well as a torque through facility and is available with or without standard GS fishing profile.View Product

NO-GO

The Coil Solutions NO-GO is installed at the top of the Bottom Hole Assembly to ensure string tagging on the stripper when removing service tools from the well bore.View Product

Quick Connect

Allows the tool string to be assembled in two manageable sections and can be connected over the wellhead without turning the Bottom Hole Assembly. View Product

Roll Ons

Attaches two pieces off coil tubing together or attaches the BHA at the end of the coil tubing by internally crimping the coil to match the crimping grooves provided. View Product

Rotating Wash Tool

Delivers high jet power fluid to the tubing/casing walls for scale removal and other obstructions within the well.View Product

Slip Connector

Attached the BHA to the end of the coil. The slips ensure that the axial load is transferred onto the coil. Comprised of a Top Sub, a Slip, Brass Ring and a Bottom Sub with desired Connection. View Product

Slip Dimple Coil Connector

Attaches the BHA to the end of the coil. The slips ensure that the axial load is transferred onto the coil. Comprised of a Top Sub, a Slip, Brass Ring and a Bottom Sub with desired connection. View Product

Straight Bars

Our range of straight bars will accommodate those service jobs that need a straight line service string.View Product

Tandem Flapper Check Valve

Provides a means of closing off back pressure from the coil tubing within the well.View Product

Threaded Roll Ons

Attaches the BHA at the end of the coil tubing by internally crimping the coil to match the crimping grooves provided. View Product

Torque Thru Knuckle Joint Assembly

Provides additional flexibility to the tool string and allow tools to be run in restricted or highly deviated wells.View Product

Tri Circulation Sub

Provides method of circulation when stuck in hole, removing debris from BHA.View Product

Wash Shoe

Cleans the inside of well tubulars, allowing the removal of residue such as salt, sand, mud, rust and scale.View Product